Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
Fumex GmbH
Max-Holder-Straße 41,
60437
Frankfurt
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Location
Hall map
Fairground map
Our range of products
Product categories
- 32 Welding, cutting and gas cutting machines
- 32.11 Welding fume exhaust units
Welding fume exhaust units
- 49 Disposal systems
- 49.07 Oil and oil mist vacuuming systems
Oil and oil mist vacuuming systems
- 50 Safety and environment
- 50.01 Exhaust systems
Exhaust systems
- 50 Safety and environment
- 50.06 Dust separating systems, filtering systems, filters
Dust separating systems, filtering systems, filters
Our products
Product category: Welding fume exhaust units, Exhaust systems, Dust separating systems, filtering systems, filters
CMF - cleanable mobile filter unit for industrial production
The FUMEX CMF is a cleanable mobile filter unit with built-in fan and top mounted extraction arm for the cleaning of dust laden and polluted air in ventilated full-scale workshop environments. The filter unit has been developed according to ISO 15012-1 for welding safety products.
Three models. Three cleaning methods:
CMF 10 – with manual cleaning
CMF 20 – with motorised cleaning
CMF 30 – with motorised and pneumatic cleaning
The impeller of the fan has backward-curved blades and high efficiency. It is designed to maintain a steady and high airflow, even when the filter cartridge is contaminated. Combined with the low pressure drop of the extraction arm, the CMF filter unit provides high performance.
Three models. Three cleaning methods:
CMF 10 – with manual cleaning
CMF 20 – with motorised cleaning
CMF 30 – with motorised and pneumatic cleaning
The impeller of the fan has backward-curved blades and high efficiency. It is designed to maintain a steady and high airflow, even when the filter cartridge is contaminated. Combined with the low pressure drop of the extraction arm, the CMF filter unit provides high performance.
Product category: Welding fume exhaust units, Exhaust systems, Dust separating systems, filtering systems, filters
FUMEX Extraction Arms
Our range of extraction arms is both extensive and leading-edge. All our extractors feature considerable positional stability and user-friendly aluminium designs. Also among the benefits are the external joints that ensure a clean interior with low pressure drops.
Product category: Welding fume exhaust units, Exhaust systems, Dust separating systems, filtering systems, filters
CFE - dust filter for large airflows
CFE is suitable for filtration of dry particles, dust and welding smoke for mechanical industry.
The filter is manufactured with 2, 4, 6 and 8 horizontally placed filter cartridges for airflows from 1000m³/h to 12000 m³/h. For larger airflows more filters can be placed parallel and/or serial in the same system.
Continuous self-cleaning of the filter cartridges with efficient power pulse valves and aerodynamically designed deflectors significantly increases the life span of the filter media. The filter can be cleaned during operation and/or through cleaning cycles when the plant is not in operation.
The filter is manufactured with 2, 4, 6 and 8 horizontally placed filter cartridges for airflows from 1000m³/h to 12000 m³/h. For larger airflows more filters can be placed parallel and/or serial in the same system.
Continuous self-cleaning of the filter cartridges with efficient power pulse valves and aerodynamically designed deflectors significantly increases the life span of the filter media. The filter can be cleaned during operation and/or through cleaning cycles when the plant is not in operation.
Product category: Exhaust systems, Dust separating systems, filtering systems, filters
FUMEX CV - a flexible modular filter for particles and gas
The modular structure provides maximum flexibility for both gas- and particle filtration, from simple disposable filters to more customized solutions. CV can also combine gas and particle filtration in the same system.
Particle filtration allows for compressed air cleaning.
The modular filter is primarily dimensioned to handle fumes from one work station, but several filters can be parallel connected to serve several work stations in the same system.
The filter unit is wall mounted and the sturdy profile makes the installation easy, but also simplifies necessary service and maintenance.
Particle filtration allows for compressed air cleaning.
The modular filter is primarily dimensioned to handle fumes from one work station, but several filters can be parallel connected to serve several work stations in the same system.
The filter unit is wall mounted and the sturdy profile makes the installation easy, but also simplifies necessary service and maintenance.
Product category: Welding fume exhaust units, Exhaust systems
FUMEX TW/TWG - a robust welding & grinding talbe
Industrial tables with effective extraction for grinding & welding
FUMEX TW & TWG are industrial welding and grinding tables for handling smoke, dust, and particles during welding and grinding work. They remove harmful substances directly from the operator’s breathing zone. The tables connect to a separate fan or existing fan system. With a 1370 x 700 mm worktop and adjustable working height.
Opening side panels allow for easy adaptation based on the needs of the workplace.
Two dampers are located on the back panel for easy airflow control and optimisation. Double Ø200 mm pipe connections at the top of the tables ensures a high airflow. One of the short sides is equipped with a welding gun holder.
FUMEX TW & TWG are industrial welding and grinding tables for handling smoke, dust, and particles during welding and grinding work. They remove harmful substances directly from the operator’s breathing zone. The tables connect to a separate fan or existing fan system. With a 1370 x 700 mm worktop and adjustable working height.
Opening side panels allow for easy adaptation based on the needs of the workplace.
Two dampers are located on the back panel for easy airflow control and optimisation. Double Ø200 mm pipe connections at the top of the tables ensures a high airflow. One of the short sides is equipped with a welding gun holder.
Product category: Exhaust systems
FUMEX - ErP approved fans, high energy efficiency
Our compelte sortimen of fans is ErP certified - offering high efficieny.
FUMEX FTE - radial fan for high concentrations of dust-laden air.
Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight blades allowing it to handle large amounts of dust with less risk of imbalance that could cause bearing damage.
FUMEX FBE 1100 - Centrifugal fan for high-volume airflows with high total efficiency according to ErP2015.
An energy-efficient fan designed for industrial environments, which can be installed either indoors or outdoors. Ideal for expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15,000 m³/h (4,160 l/s). The impeller has curved blades and is made from welded sheet metal.
FUMEX FB - this fan is adapted to the specific requirements of local exhaust ventilation systems and evacuation of gases, smoke and small particles. For example in
welding and vehicle exhaust gases. Developed with a strong focus on performance and design:
FUMEX FTE - radial fan for high concentrations of dust-laden air.
Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight blades allowing it to handle large amounts of dust with less risk of imbalance that could cause bearing damage.
FUMEX FBE 1100 - Centrifugal fan for high-volume airflows with high total efficiency according to ErP2015.
An energy-efficient fan designed for industrial environments, which can be installed either indoors or outdoors. Ideal for expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15,000 m³/h (4,160 l/s). The impeller has curved blades and is made from welded sheet metal.
FUMEX FB - this fan is adapted to the specific requirements of local exhaust ventilation systems and evacuation of gases, smoke and small particles. For example in
welding and vehicle exhaust gases. Developed with a strong focus on performance and design:
- For airflows from 200 m³/h to 11 000 m³/h
- High total efficiency that meets the requirements of ErP 2015 = high energy efficiency, sustainability and carbon reduction
About us
Company portrait
Market-leading product range
FUMEX has the market’s widest range of products for the evacuation of harmful airborne gases and particles. Our entire product range covers everything from local extractors for industrial and laboratory environments, to extractors for vehicle exhaust fumes, fans, control units, filters and workshop equipment.
High level of service and short delivery times
Important added values include our quality and speed in respect of service/support and deliveries. Thanks to our rational assembly production, we can often offer short delivery times. The keys to this high level of service are our endeavour to be accessible as well as a high level of expertise which ensures the quality of our support in technical matters.
Products that make a difference
Part of our success is due to our strong focus on product development. Design, material selection and production technology are all areas in which we excel. The market’s broadest range of extractor arm types and sizes enable us to help our customers attain optimal solutions to their particular needs.
Our products provide documented improved and healthier working environments. This promotes healthier and more motivated personnel with fewer work-related absences due to illness. Lower energy and heating costs are other examples of what our products can mean for users.
FUMEX has the market’s widest range of products for the evacuation of harmful airborne gases and particles. Our entire product range covers everything from local extractors for industrial and laboratory environments, to extractors for vehicle exhaust fumes, fans, control units, filters and workshop equipment.
High level of service and short delivery times
Important added values include our quality and speed in respect of service/support and deliveries. Thanks to our rational assembly production, we can often offer short delivery times. The keys to this high level of service are our endeavour to be accessible as well as a high level of expertise which ensures the quality of our support in technical matters.
Products that make a difference
Part of our success is due to our strong focus on product development. Design, material selection and production technology are all areas in which we excel. The market’s broadest range of extractor arm types and sizes enable us to help our customers attain optimal solutions to their particular needs.
Our products provide documented improved and healthier working environments. This promotes healthier and more motivated personnel with fewer work-related absences due to illness. Lower energy and heating costs are other examples of what our products can mean for users.
